Special pricing can be arranged for volume or frequent customers
Solderability Testing Charges.
We recommend between five and 10 Pieces per Lot # being sampled. Normally each Lot # is regarded as a stand alone test and is subject to a minimum charge. Please contact us to discuss discounts.
There is a minimum charge of $130 for testing coupons or simple components only.
Analysis of the Data and compilation of the report extra. Cost for report $130
Due to the wide variety of customer requirements it is almost impossible to publish accurate charges. Use the tables as a guideline only and contact us for correct pricing
| Number of Parts Tested | Price |
| 1 to 19 | Minimum charge of $135 |
| 20 and above | $8.00 each |
* For the majority of Parts one Part equals one Test, however flat packs and quad packs require each side tested. This can double or quadruple the number of tests required.
Solder used: Sn/Pb 63/37 Eutectic There is a set up charge of $50 for other solders
Other Solders available 96.5/3.5 Sn/ Ag. 94.5/3.5/2.0 Sn/ Ag/ Cu. 99.3/0.7 Sn/ Cu
Flux used: Actiec 2. We carry a range of Fluxes.
If you require an Alloy or flux we do not carry we ask that you supply it with the samples being tested or
we will purchase it for you and return any unused product to you. We will add a handling charge for Freight
Prices are subject to change without notice. Please contact us for accurate quote.
For non coupon or complex components use the following table as a guide only.
These prices reflect the extra work involved in setting up the samples
| Number of Parts Tested | Price |
| 1 to 19 | Minimum charge of $250 |
| 20 and above | $16.00 each |
* For the majority of Parts one Part equals one Test, however flat packs and quad packs require each side tested. This can double or quadruple the number of tests required.
For tests that require special preparation we will quote upon receipt of sample or Test pieces.
Conditioning is extra, dependent on requirements. Price on request.
Turnaround time is normally within seven working days. There is a premium for next day turnaround.
Test results are normally E-mailed. Large reports are sent as hard copies, along with the test pieces, if required, by regular USPS parcel service.
UPS or Priority mail charged extra.
Results can be sent on a CD-Rom for an additional $25
Prices are subject to change without notice. Please contact us for accurate quote.
We are not limited to Wetting Balance Testing. Please contact us with your requirements.