Solderability
Testing and Solutions Inc.
Solderability
Testing and Solutions Inc.
Solderability Testing and Solutions, Inc currently represents the following Products
Metronelec line of Liquid Solder Products.
EnviroSense® Environmentally friendly but effective cleaning products.
We are looking for other companies that need representation in the market place either in sales or service that do not want the expense of a full time sales rep or service technician. We are prepared to absorb part of the training costs involved in familiarization with your product line. Our main office is located close to Cincinnati International Airport.
We have experience in Soldering. Solderability, Components, Leadframes, Connectors , PCBs and Assembly, and are fully conversant with ISO 9000:2000 and ISO 140001. Our Management team are knowledgeable in almost all areas of business operations giving us a greater insight and appreciation of the needs of our customers.
If you thing we may be able to help you or if you would like more information please contact us.
Contact us for our current price lists.
Testing and Consulting
Our service charges are comparable with industry standards. See Testing Charges or contact us for a full quote.
Solderability Testing. We currently provide Wetting Balance testing, Dip and Look and solder float testing for your samples.
XRF Analysis to determine correct plating thickness.
Auger Test
SEM/EDAX
RH and Steam Aging
Sectioning and photographs
Results can be e-mailed, faxed, mailed or phoned immediately upon completion of the test.
Quotes. We can ballpark a quote before seeing the parts for testing. We will issue a correct quote before testing after we have received the parts
Machine Repair
Quotes. We can ballpark a quote without seeing the machine however for an accurate quote we charge for the labor required to determine the problems. This charge is waived should the quote be accepted. Any additional charges that might arise as the machine is tested / calibrated are disclosed prior to proceeding with the work.
Calibration. The wetting balance requires yearly calibration. The solderability is determined by the contact angle θ. This angle is determined from the wetting force F = g .cosq .c - g.p.v where
g = surface tension of Flux / Molten solder ( @ 0.4 mN/mm )
c = specimen perimeter ( mm )
q = contact angle
g = gravitational acceleration ( 9.81 m/s˛ )
p = solder density ( 8 mg/mm3 )
v = specimen immersed volume ( mm3 )
Therefore, unless the load cell measuring the Force is correctly calibrated the contact angle will not be correct.
We issue a calibration certificate good for one year.
Repair. In general parts requiring replacement are replaced with the same factory part. Older machines may require modification if the part is no longer available. Up-grades are offered at the time of the quote. We recommend that the machine be recalibrated after undergoing any major repair.
Travel expenses to your location to repair or calibrate a machine are charged however the machine can be sent to our head office. You can ship it to us and arrange for collection when the work is completed or we can send a shipping case to you, which is eventually returned empty to us, upon receipt of the repaired/recalibrated machine at your location.
Consumables.
Consumables and spare parts are shipped UPS ground unless otherwise requested.
We are looking to expand in the US, Canadian and South American markets.
Territories available. Contact us for full details.
Solderability Testing and Solutions Inc.
Blair Park, Rosedale Ave. Richmond KY 40475 USA
Ph: 1-859-353-5914 E-mail: jobrien@standsgroup.com
